Gate valves
Textsuche
Kategorien
Straight pattern, PN 16, female thread, handwheel, operating temperature: max. 205°C,
body: 1.4408, trim: 1.4408, gland packing: PTFE
Dokumente
Straight pattern, PN 16, female thread, handwheel, operating temperature: max. 90°C,
body: brass, trim: brass, gland packing: PTFE
Dokumente
Resilient flat-body gate valve according to DIN 3352-Teil 4, flange connection according to DIN, PN 16,
from DN 200: PN 10 or PN 16, body: GGG-50, EKB-coated, wedge: GGG-50 EPDM coated,
face to face according to F4, without handwheel
Dokumente
Resilient oval-body gate valve according to DIN 3352-Teil 4, flange connection according to DIN, PN 16,
from DN 200: PN 10 or PN 16, body: GGG-50, EKB-coated, wedge: GGG-50 EPDM coated,
face to face according to F5, without handwheel
Dokumente
Round body gate valve according to DIN 3352, flange connection according to DIN,
body: 1.0619, bellow: stainless steel AISI 304, trim: 13% Cr, outside screw and yoke,
with handwheel, face to face according to F5 (PN 10-25) and F7 (PN 40),
operating temperature: max. 400°C
Type PA-031BS: PN 16
Type PA-032BS: PN 25
Type PA-033BS: PN 40
Dokumente
casing liner/pipe bell/collar: PE, spindle: galvanized steel, cap/coupling: GJS-400-15
Dokumente
casing liner/pipe bell/collar: PE, spindle: galvanized steel, cap/coupling: GJS-400-15
Dokumente
street box for water valves
type 9501-GJL: body/cover: cast iron EN-GJL-250 / type 9501-PEHD: body: PEHD,
cover: cast iron EN-GJL-250
Dokumente
Manual controls valves and spottlers assembled underground
pillar: stainless steel 1.4301, spindle: 1.4301/1.4021, indicator: Messing
Dokumente
Recommended for valves mounted at lower levels in wells or directly in the ground,
pillar: stainless steel 1.4301, spindle: 1.4301/1.4021, indicator: Messing, flange: F10 or F14, coupling: ISO 5210 – B3
Dokumente
Cardan joint: stainless steel 1.4301, spindle: galvanized steel, cap/coupling: GJS-400-15
Dokumente
Resilient flat body gate valve according to DIN 3352-Teil 4, flange connection according to DIN, PN 16,
from DN 200: PN 10 or PN 16, body: GGG-50, EKB-coated, wedge: GGG-50 EPDM coated,
face to face according to F4, with topflange and output drive B3
Dokumente
Resilient oval body gate valve according to DIN 3352-Teil 4, flange connection according to DIN, PN 16,
from DN 200: PN 10 or PN 16, body: GGG-50, EKB-coated, wedge: GGG-50 EPDM coated,
face to face according to F5, with topflange and output drive B3
Dokumente
Resilient flat body gate valve according to DIN 3352-Teil 4, flange connection according to DIN, PN 16,
from DN 200: PN 10, body: GGG-40, EKB-coated, wedge: GGG-40 EPDM coated, with handwheel,
face to face according to F4,
electric actuator, manufacturer AUMA, type SA, manual override with handwheel, temperature: -40°C up
to +80°C, 2 limit switches, 2 torque limiter, protection class IP 67, ED 30%, voltage: 3~400V/50Hz
Dokumente
Resilient oval body gate valve according to DIN 3352-Teil 4, flange connection according to DIN, PN 16,
from DN 200: PN 10, body: GGG-40, EKB-coated, wedge: GGG-40 EPDM coated, with handwheel,
face to face according to F5,
electric actuator, manufacturer AUMA, type SA, manual override with handwheel, temperature: -40°C up
to +80°C, 2 limit switches, 2 torque limiter, protection class IP 67, ED 30%, voltage: 3~400V/50Hz