Pneumatical

Kugelhähne gehören zu den Absperrarmaturen. Die Kugelhähne können per Hand oder mit einem Antrieb betätigt werden. Durch den ISO Aufbauflansch können bei vielen Kugelhahntypen elektrische oder pneumatische Antriebe montiert werden. Desweiteren gibt es die Möglichkeit Endschalterboxen direkt auf einen Kugelhahn zu montieren.

Je nach Anforderung gibt es Kugelhähne auch mit verschiedenen Zulassungen:

- TA Luft

- DVGW Gas

- Fire safe

Textsuche

Kategorien

Female threads, PN 63, full port, 2-pc., operating temperature: -20 to +180°C, body: 1.4408, ball: 1.4408, seat: TFM-1600, pneumatic actuator, double acting (DA) or spring return (SR), necessary actuating pressure: 6 bar 

Butt weld ends, PN 63, full port, 3-pc., operating temperature: -20 to +180°C, body: 1.4408, ball: 1.4408, seat: TFM-1600, pneumatic actuator, double acting (DA) or spring return (SR), necessary actuating pressure: 6 bar

Female threads, PN 63, full port, 3-pc., operating temperature: -20 to +180°C, body: 1.4408, ball: 1.4408, seat: TFM-1600, pneumatic actuator, double acting (DA) or spring return (SR),necessary actuating pressure: 6 bar 

Type PA-19P.266.P Full port, 2-pc., face to face according to DIN 3202 F4, from DN 125 F5, flanges according to DIN PN 10/40,  from DN 65 PN 10/16, operating temperature: max. 180°C, body: 1.4408, ball: 1.4408, seat: TFM-1600, pneumatic actuator, double acting (DA) or spring return (SR), necessary actuating pressure: 6 bar 

Full port, flanges according to DIN PN 10/16, operating temperature: max. 180°C, body: 1.4408, ball: 1.4408,  seat: TFM-1600, pneumatic actuator, double acting (DA) or spring return (SR), necessary actuating pressure: 6 bar 

Female threads, PN 32/16, full port, 2-pc., operating temperature: -20 to +130°C, body: brass nickel plated, ball: brass chrome plated, seat: PTFE/FKM, pneumatic actuator, double acting (DA) or spring return (SR), necessary actuating pressure: 6 bar 

Full bore, PN 16, body: GG-25, seat: PTFE, ball: brass chrome plated, face to face: F4,  temperature: -10°C to +150°C, pneumatic actuator, double acting (DA) or spring return (SR), necessary actuating pressure: 6 bar 

Full bore, PN 16, body: GGG-40, seat: PTFE, ball: brass chrome plated, face to face: F4,  temperature: -10°C to +150°C, pneumatic actuator, double acting (DA) or spring return (SR), necessary actuating pressure: 6 bar

Full port, 2-pc., face to face according to DIN 3202 F4, from DN 125 F5, flanges according to DIN PN 10/40, from DN 65 PN 10/16, operating temperature: max. 180°C, body: steel 1.0619, ball: 1.4308, seat: TFM-1600, pneumatic actuator, double acting (DA) or spring return (SR), necessary actuating pressure: 6 bar

Full port, flanges according to DIN PN 10/16, operating temperature: max. 180°C, body: 1.0619, ball: 1.4308,  seat: TFM-1600, pneumatic actuator, double acting (DA) or spring return (SR), necessary actuating pressure: 6 bar

Female threads, PN 63, reduced bore, L- or T- bore, operating temperature: max. 180°C, body: 1.4408, ball: 1.4408, seat: TFM-1600, pneumatic actuator, double acting (DA) or spring return (SR), necessary actuating pressure: 6 bar 

Full port, flanges according to DIN PN 10/16 (up to DN 50: PN 40), L- or T- bore, operating temperature: max. 180°C, body: 1.4408, ball: 1.4408, seat: TFM-1600, all-side tightness, pneumatic actuator, double acting (DA) or spring return (SR), necessary actuating pressure: 6 bar

Female threads, PN 10-30, full bore, L- or T- bore, operating temperature: max. 150°C, body: brass nickel plated, ball: brass chrome plated, seat: PTFE, pneumatic actuator, double acting (DA) or spring return (SR), necessary actuating pressure: 6 bar

Technische Informationen

Ausführung

Kugelhähne gibt es in verschiedenen Ausführungen. Bei der Ausführung unterscheidet man zwischen 1-teiligem, 2-teiligem oder 3-teiligem Kugelhahn. 1-teilige Kugelhähne haben meist einen reduzierten Durchgang, während 2- und 3-teilige Kugelhähne einen vollen Durchgang besitzen.

Anschlussarten

Wir haben verschiedene Anschlussarten im Programm. Die Kugelhähne erhalten Sie mit Gewinde-, Flansch- oder Anschweißende.

Gehäusematerial

Bei dem Gehäuse gibt es folgende Materialien zur Auswahl:

- Messig

-Stahl

-Edelstahl

-Grauguss

-Sphäroguss

Betätigung. Betätigung

Alle Kugelhähne können von Hand betätigt werden. Die Bewegung kann mit einem Handhebel oder einem Handrad mit Getriebe (Aufbauflansch erforderlich) ausgeführt werden. Bei den Kugelhähnen mit Aufbauflansch gibt es vielfältigste Antriebsmöglichkeiten. Für die Pneumatikantriebe muss zwischen einfach- oder doppeltwirkend entschieden werden. Bei den elektrischen Antrieben gibt es die Auswahl zwischen 24 V, 230 V und 400 V.

Nennweiten

Unsere Kugelhähne bieten wir von der Größe 1/4" bis 4" und DN 8 bis DN 600 an.

Zeugnisse und Zulassung

Für fast alle Kugelhähne sind Prüfzeugnisse 2.2 und 3.1 verfügbar. Aber auch Zeugnisse und Zulassungen sind für besondere Anforderungen möglich:

-TA Luft

-DVGW-Gas 

-DVGW Trinkwasser

-Atex-Feuersafe