Innovations

Wafer type knife gate valve, body: EN-GJS-400-15 EKB, gate: AISI 304 or AISI 316,

seat: NBR, packing: NBR, support plates: stainless steel, non rising stem and handwheel,

flanges according to DIN 2501 PN 10, face to face according EN 558-1 series 20 (K1)

Type PA-7300.125.NN: gate AISI 304

Type PA-7300.126.NN: gate AISI 316

Check valve with flanges, flange connection: DN 50 - 150: PN 16, DN 200 - 300: PN 10 or PN 16,
inside stem, face to face according to EN 558-1 series 48 (F6),
body: EN-GJS-500-7 (GGG-50), EKB-coating min 250μm according to GSK,
disc: EN-GJS-500-7 (GGG-50), EPDM covered
Type PA-4100.125.E: shaft: AISI 420
Type PA-4100.126.E: shaft: stainless steel AISI 316

Check valve with flanges, flange connection: DN 50 - 150: PN 16, DN 200 - 300: PN 10 or PN 16,
inside stem, face to face according to EN 558-1 series 48 (F6),
body: EN-GJS-500-7 (GGG-50), EKB-coating min 250μm according to GSK,
disc: EN-GJS-500-7 (GGG-50), EPDM covered
Type PA-4150.125.E: shaft: AISI 420
Type PA-4150.126.E: shaft: stainless steel AISI 316

Check valve with flanges, flange connection: DN 50 - 150: PN 16, DN 200 - 600: PN 10 or PN 16,
inside stem, face to face according to EN 558-1 series 48 (F6),
body: EN-GJS-500-7 (GGG-50), EKB-coating min 250μm according to GSK
Type PA-4200.127:, seat: bronze, shaft: AISI 420, opturator: AISI 420
Type PA-4200.126: seat/shaft/opturator: stainless steel AISI 316

Optional also in PN 25 and PN 40 available.

Check valve with flanges, flange connection: DN 50 - 150: PN 16, DN 200 - 600: PN 10 or PN 16,
inside stem, face to face according to EN 558-1 series 48 (F6),
body: EN-GJS-500-7 (GGG-50), EKB-coating min 250μm according to GSK
Type PA-4250.127:, seat: bronze, shaft: AISI 420, opturator: AISI 420
Type PA-4250.126: seat/shaft/opturator: stainless steel AISI 316

Optional also in PN 25 and PN 40 available.

Full port, 2-pc., face to face according to EN 558-1 serie 1, flanges according to DIN PN 16,
operating temperature: max. 160°C, handlever, with mountingpad

Type PA-844D.255.P: body: 1.4308 + PFA, ball: 1.4308 + PFA, seat: PTFE

Round body gate valve according to DIN 3352, flange connection according to DIN,
body: 1.0619, bellow: stainless steel AISI 304, trim: 13% Cr, outside screw and yoke,
with handwheel, face to face according to F5 (PN 10-25) and F7 (PN 40),
operating temperature: max. 400°C

Type PA-031BS: PN 16
Type PA-032BS: PN 25
Type PA-033BS: PN 40

Type IFM MVQ101
All around clearly visible status LED for increased distance effect, Accurate and continuous position feedback of the valve position, Diagnostic functions such as time monitoring and cycle counter, Changes in the closed position are reported to indicate signs of attachment or wear of the seal.Flexible parameterization via teach button or IO-Link, 3 x normally open / normally closed; (selectable); DC PNP; M12 plug connection; IP 65; IP 67; (Switching cam area dust-proof); 3-wire; Ambient temperature -25 ... 70 ° C
for direct mounting on our pneumatic actuators, without brackets, from 140DA/SR with brackets

reduced port, face to face according to EN 558-1, flanges according to DIN PN 16,
L- or T-port, operating temperature: max. 160°C, handlever, with ISO-Directmountingpad with gland packing

Type PA-848D.255.P: body: 1.4308 + PFA, ball: 1.4308 + PFA, seat: PTFE

Type PA-870.266.P (PN 16)
Type PA-870.466.P (PN 40)

Full port, 2-pc., face to face according to EN 558, flange according to DIN PN 16 or PN 40,
operating temperature: -196 – up to +150°C, body: 1.4408, ball: 1.4408, seat: PCTFE, handlever,
release bore, with ISO-Directmountingpad